Enhance the longevity and appearance of your deck with Cabot’s Natural Decking Oil, a fast-drying, deep-penetrating oil designed to nourish and protect exposed timbers. With a quick re-coat time of just 6 hours, Cabot’s Natural Decking Oil allows you to apply two coats in a single day, giving you more time to enjoy your weekend. This traditional decking oil is perfect for use on decks, garden furniture, pergolas, fences, and gates.

PREPARATION

New Bare TimberTo coat new bare timber immediately, scrub damp timber with Cabots New Timber Prep, following label instructions. New Timber Prep will draw out tannins and oils quickly from the surface, allowing you to skip the 4-6 weeks weathering process required for new timber. Always follow New Timber Prep with Cabots Deck Clean following label instructions. Remove excess water from the surface with a squeegee on Cabots Deck Prep brush, and allow timber to dry for at least 1 hour. Note: Cooler conditions could slow down the drying time of the timber.

Previously Painted or Varnished TimberRemove back to bare timber using a paint stripper or sanding. For exterior surfaces, clean with Cabots Deck Clean following label instructions.

Previously Stained and Oiled TimberFor exterior surfaces, clean with Cabots Deck Clean following label instructions. Test if the surface is ready for coating by sprinkling water on the timber. If the water beads on the surface, further weathering, sanding, or use of a timber stripper is required before applying Cabots Natural Decking Oil. If the water soaks into the surface, you are ready to apply.

Weathered and Grey TimberSand timber back to fresh timber. Clean with Cabots Deck Clean following label instructions. Note: Fill holes and imperfections with a suitable timber putty after applying the first coat.

APPLICATION

Apply with a Brush or Decking Applicator

1. Stir thoroughly with a broad flat paddle before and during use.
2. Apply liberally along the length of the board including exposed edges and end grain by brush or pad applicator.
3. Apply two coats allowing 6 hours between coats.

MAINTENANCE

Every 12 months, check your coated timber for changes in color or water repellency due to weathering. When required:

1. Clean the surfaces with Deck Clean as per label instructions.
2. Recoat with 2 coats of Natural Decking Oil.

Use Cabots Everyday Deck Wash to refresh exterior timber decking and help remove dirt, dust, and bird droppings for everyday use.

Features

• Deep penetrating, natural decking oil
• Protects timbers against dirt and mold
• UV resistant and water repellent